PR97™ 220gsm/6.0z knit fabric. This natural, light weight wool/FR viscose blend makes for a comfortable, multi-protective, cost effective option. Ideal for undergarments, T/shirts, balaclavas and hoods.
Available in:
QUALITY
PR97™
Knit
Interlock
Mass (g/m²)
220-240 gsm
Width (cm)
152-156 cm
Fibre Content (Intimate Blend)
Wool / FR Viscose
Burst Strength
SO 13938 1.2
Min 400 kPa
Abrasion Resistance
ISO 12947:1998 E, 9kPa, Martindale (min)
Min 40 000
Colorfastness to Light
ISO 105-B02:1994 (min)
Min 5
Colorfastness to Rubbing
Dry(min):
ISO 105 X-12:1993 E
Wet(min):
Min 4
Min 4
Colorfastness to
Perspiration
Change
Shade(min):
ISO 105 E04
Stain Cotton /
Nylon(min):
Min 4
Min 4
Colorfastness to Washing
Change
Shade(min):
ISO 105 C06
Stain Cotton /
Nylon(min):
Min 4
Min 4
Washing Shrinkage
ISO 6330: 2000 (E) 7B, Drying Method A
Warp: max 6%
Weft: max 6%
Determination of Ease of Ignition of Vertically Oriented Specimens
ISO 6940 – 1984 (E) : procedure A: Surface Ignition
Failure to Ignite
Flame Spread
EN 532:1992
A
Radiant Heat
EN 366:1993 (20kW/m2)
C1
Convective Heat
EN 367:1992
B2
Metal Splash
Molten Aluminium (EN 373:1993)
D1
Metal Splash
Molten Iron (EN 373:1993)
E1
Thermal Protection Performance Rating
(ASTM F 1959M-05)
Arc Rating:
ATPV>8 cal/cm2 (Category 2 compliant)
Tests referred to are laboratory simulations. These fabric tests are conducted to standards developed to show likely performance. The results given do not necessarily show performance in an actual hazard situation.
At the time of producing this document the information supplied was the most accurate available. This information is given as a guide and should be used in conjunction with your own research and experimentation. No guarantee of the test results are made by Bruck Group Pty Ltd nor any obligation or liability assumed whatsoever in regard to this information. Anyone intending to use this product should satisfy for themselves that it is suitable for the end use required. Verbal statements to the contrary of this information shall not be binding on Bruck Group Pty Ltd.
